The all-metal AXAGON EE25-F6S FULLMETAL SILVER external case is designed for USB 3.0 and SATA 6G interfaces for 2.5 "SATA hard drives and SSDs.
Quick and easy replacement of hard drives in the box without screwing can be used for data migration, testing and other tasks.
The current SATA III / 6G interface with UASP support allows you to take advantage of the speed of modern SSDs.
The TRIM option limits the gradual degradation of SSD performance.
You can monitor the status of the external disk by reading SMART information. It also supports shutting down connected disks and the box.
Lightweight and durable, clean aluminum housing for perfect mechanical protection of the plate and excellent heat dissipation.
The luxurious rounded design of the housing promises pleasant use and prevents unwanted fingerprints.
Features: • Fully compatible with USB 3.1 gen 1 / USB 3.0 and backwards compatible with USB 2.0. • Supports the following baud rates: 12/480/5000 Mbps (full / high / super speed). • Supports 2.5 ”SATA III / II / I HDD and SSD hard drives without limiting the maximum capacity, max. Up to a height of 9.5 mm. • Complies with Serial ATA 3.1 specification (SATA / 600) with transfer rates up to 6 Gb / s. • Meets Serial ATA 2.0 specification (SATA / 300) with up to 3 Gb / s transfer rate (300 MB / s). • Complies with Serial ATA 1.0 specification (SATA / 150) with transfer rates up to 1.5 Gb / s (150 MB / s).
• The total bandwidth / transfer rate of the case is determined by the USB 3.0 interface used (theoretically 5 Gbit / s). • Supports UASP (USB Attached SCSI Protocol). • SSD / HDD boot support in external case. • HDD Auto Shutdown - automatically shuts down the hard drive after 10 minutes of inactivity. • HDD Shutdown - Also shuts down the disc after removing the device or shutting down the PC. • Ability to connect the device thanks to Hot Plug support. • Full Plug and Play support. • Connection with USB 3.0 micro B female connector. • USB 3.0 Type A male / USB 3.0 micro BA male cable, 60 cm long. • Power supply via USB 3.0 bus up to 900mA is sufficient for all USB ports.
• A pleasant blue LED indicating connection to the computer's USB port (steady) and data transfer (flashing). • Aluminum housing for quick and screw-free plate mounting - just open the box, insert the plate and close the box. • External case dimensions: 129 x 78 x 15 mm. • External box weight 89 g (without USB cable and disk).
Supported operating systems: MS Windows XP / Vista / 7/8 / 8.1 / 10 or later, Windows Server 2003/2008/2012/2016 or later (all 32-bit and 64-bit Windows systems supported), Mac OS X 10. x or later with Linux 2.6.x kernel or higher. Note: Drivers are included with operating systems and are installed fully automatically. No other drivers need to be installed and they are not available.
Package contents: • USB 3.0 2.5 ”outer case in silver, • USB 3.0 60 cm cable, • Multilingual manual: ENG / CZ / DE / ESP / FR / HU / IT / PL / RO / RU / SK , • packed in a cardboard box.
